Supports DDR4 LRDIMM/RDIMM/NV-DIMM ECC memory Memory frequency supports 2133/2400/2666/2933MHz Single CPU supports 6*DDR4 channel, each channel supports 2 memory slots, Total 24*DDR4 memory slots in CPU0/CPU1. Single slot capacity is 8GB, 16GB, 32GB, 64GB, 128G
Expansion Card
1.(Left) PCI-Express 3.0 X24 slots are from CPU0; 2.(Middle) PCI-Express 3.0 X24 slots are from CPU0 / CPU1; 3.(Eight)PCI-Express 3.0 X16 slots are from CPU1.
Hard Disk
Max. support 25 front 2.5 inch SAS/SATA (HDD/SSD) Rear support 4* 2.5 inch SAS/SATA (HDD/SSD) and 4* rear 3.5/2.5-inch SAS/SATA (HDD/SSD) onboard 3*8643 port , 2* SATA DOM
M.2 SSD
2 M.2 PCIE X2 (2280)
LAN
Onboard 2 Gigabit RJ45 data net port (optional 2* 10Gigabit RJ45)
External Port
Front: VGA, 2 USB3.0 Rear: VGA, 2 USB3.0, 1 management net port, 2 RJ45 data net ports, 1 DB-9 COM
Management
Onboard iBMC management module, supports IPMI, SOL, KVM Over IP, Virtual media and more
System Fan
4* 8038 fan (optional 4* 8056 fan)
Power Supply
Standard configurated withPlatinum 550W, optional 800W, 1200W, 1600W hot-swap Redundant power supply (based on the actual power)
Dimensiom
2U rackmount, 748x433.4x87.6mm
Front panel components
2U25 Bay model
S/N
Name
S/N
Name
1
2.5 inch Hard Disk
3
USB3.0 Port
2
VGA Port
Front panel port description
Name
Type
Note
VGA Port
DB15
Used to connect display terminal, such as screen or KVM.
USB Port
USB 3.0
USB external interface is provided to access USB devices. Note: When using the external USB device, please make sure that the USB device is in good condition, otherwise the server may work abnormally.
Front panel LED and button
S/N
LED/Button
S/N
LED/Button
1
Power switch button/LED
5
System alarm LED
2
UID button/LED
6
Network port 1 connection status indicator
3
Reset button
7
Network port 2 connection status indicator
4
Hard disk LED
LED Status Description
Icon
LED/Button
Description
GOOXI Logo
Power LED
Power LED description: Green (on): powered on. Green (blinking): standby. Green (off): power off. Power button description: Shortly press the button in the power-on status, and the OS will shut down normally. Hold down the button for 6 seconds to power down the server. When the power is on, press the button to start the machine.
UID LED/Button
UID LED/Button is used to locate the server to be operated. The indicator can be remotely turned off/on by manually pressing UID button or BMC command. UID description: Blue (on/blinking): the server is located. Off: server is not located. UID button description: press the button briefly to turn on/off the positioning light
Reset Button
Restart the server
Hard disk LED
Green (blinking): the hard disk is running normally
System Alarm
Including system alarm, fan alarm, power alarm, etc., and the details can be viewed through IPMI management software
LAN LED
Green (on): the network port connection is normal. Off: the network port is not in use or breakdown. Note: it corresponds to two 1GE network ports on the motherboard.
LAN LED
Green (on): the network port connection is normal. Off: the network port is not in use or breakdown. Note: it corresponds to two 1GE network ports on the motherboard.
S/N
Name
S/N
Name
1
Rise Module
7
USB 3.0 Port
2
HDD Module
8
OCP3.0 Port
3
Management Net Port
9
Power Module 1
4
VGA Port
10
Power Module1 AC Port
5
RJ45 Gigabit LAN
11
Power Module 2
6
COM
12
Power Module 2 AC Port
Note:
Both 1 and 2 can be equipped with rear hard disk module or Riser module. The figure is for reference only, and the actual configuration as standard.
Rear panel port description
Name
Type
Number
Description
VGA Port
DB15
1
It is used to connect display terminal, such as screen or KVM.
Management Net Port
GE BASE-T
1
Provides 1000 Mbit/s LAN. Through this port, the server can be managed.
USB Port
USB 3.0
2
USB port is provided to access USB devices. Caution: When using the external USB device, please make sure that the USB device is in good condition, otherwise the server may work abnormally.
RJ45 Gigabit Port
GEBASE-T
2
Server network port.
Power Module AC Port
/
1 or 2
You can choose the number of power supply according to your actual needs, but make sure that the rated power of the power supply is greater than the rated power of the whole machine.
COM
1
Serial communication port
OCP3.0 Port
1
Installation of OCP3.0 network card
Rear panel LED and button
S/N
Name
S/N
Name
1
Connection status LED
4
Data transmission status LED
2
Data transmission status LED
5
Power module LED
3
Connection status LED
6
Power module LED
LED/Button
Description
Power module LED
Green (on): the input and output are normal. Red (on): indicates that the input is normal, and there is no output due to power over temperature protection, power output over-current / short circuit, output over-voltage, short circuit protection, device failure (excluding all device failures), etc. Green (1Hz / blinking): the input is normal, and the output is closed due to power on or in position; input overvoltage and undervoltage. Green (4Hz / blinking): Firmware is in the process of online upgrading. Off: no AC power input.
Yellow (blinking): data is being transmitted. Off: no data transmission.
The ShenZhen kiosk is a company that can be tailored products for comsumers. The company is willing to undertake various sizes for the comstomer the all in one cp,advertising machine , display of custom. Prducts using aluminumm alloy manufacture,after fine polishing,and othe processes,appearance vogue is novel,more the motherboard fan thermal performance,make the computer more stability. We can do IP65 pc also. Welcom to sample.
Contact us: If you have any question ,welcome to contact us. Your close attention to our company is highly appreciated. Welcome to visit our official website www.touchkiosksupplier.com