Features Specification

3-in-1 Switch-Mode Power Converter allows you to easily build your own custom Universal Portable DC Power Bank by combining it with a portable 12 volt battery (lithium ni-cad or lead-acid) – or just simply run it directly from the 12v on board of your car or mobile home. This unit can potentially cover any voltages between 1v and 36v

It includes :

1. – 100w Step-Up (Boost) Converter with the input adjustable from 12 to 36v DC, which means you can operate or charge any devices that require voltages above 12v. This is particularly useful for various kinds of Laptops and portable computers which typically require about 18, 19 or 20v depending on a model… The voltage can be easily adjusted with a precise multi-turn trimpot.

2. – 150W Step-Down (Buck) Converter pre-set to 12v which can be made adjustable if desired – by simply installing a 10k multi-turn trimpot in the spot shown on the picture. then the output from the black DC socket can be adjusted from about 12.6v down to 5v ;

3. – 20w Buck Converter for 5v USB port capable of supplying up to 3 Amperes of USB power ;

4. – Also available a direct output from the 12v battery which also doubles as a charging input if unit is combined with a portable 12v battery.

A Battery Charge Level indicator is also built into this unit. There are 4 LEDs on the right side of the PCB.
When battery voltage is above 12.6v all 4 LEDs stay green.
LED #4 goes OFF when battery voltage drops below 80%
LED #3 goes OFF when battery voltage drops below 60%
LED #2 goes OFF when battery voltage drops below 30%v
LED #1 goes RED when battery voltage drops below 10v -which indicates that the battery is low and needs to be recharged.

Each of the 3 converters use Switch-Mode Integrated Circuits which all have built in overload, overheat and short-circuit automatic protection on chip.

Unit's Dimensions: 64mm Wide x 21mm High x 140mm Long*

• there are empty areas of PCB board at both ends of the Module. they act as some extra heat dissipating surfaces for the IC Chips. If smaller PCB dimensions are required – these flaps can be cut off and substituted by small aluminium heat-sinks glued onto the tops of IC chips… With the flaps cut off – the PCB will be 105mm Long

Unit Weight : 90 gram
Payment
We accept payment options available also include : Paypal, Bank transfer Western Union, Moneybookers, MoneyGram, Pls kindly contact with us before you place order. DO not let your order miss in payments terms
Shipping
1, Delivery time. we can only provide tracking number in 4~5 days after payment confirmed.
2,Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer's responsibility.Please check with your ountry's customs office to determine what these additional costs will be prior to placing;
Warranty Terms:
1, We provide one year warranty,If you feel desappointed with the item, please notice us within 7day of delivery,
2, All the items must be returned in original condition for refund /exchange,the buyer is responsible for all shippig costs incurred,maybe you have frustrations,please contact us before opening and dispute or leaving any nertral/negative feedback, we carefull to do our endeavor to solved any problem in a good bussiness manner;
3,Before returning items, please make sure you get our (the seller's) return address, and write "gift" on the delivery detail sheet. Please use regular postal service and send us the tracking number. As soon as we receive the items, we will repair or exchange them ASAP.
Feedback:
1, Please allow possible slight differences due to technical improvement , You order is recognized as you are with full acknowledgement of product and respective policies, our service is ready to help you any time , Aiming to create a pleasant shopping experience for you
2, We depend on our clients satisfaction to succed, Therefore, you feedback is extremely important to us ,
3, If you are satisfied with our items, please leave us positive feedback,

Why Choose us?
1.We are Alibaba Gold Supplier.

2.We are a factory specialize on All-in-One PC,best production,capability,best quality control,best service.

3.100% QC inspection Before Shippment.

4.favourable professional services,competitive price,OEM,ODM

5.most suitable purchase for you

FAQ:
What the payment Method?
We accept T/T,Paypal .

What's the shipping way?
You can choose DHL,EMS,FEDEX ect.

Do you accept OEM order?
Yes ,We accept the OEM order with your own logo as per your requirement if the quantity reached enough.Please ask for details.

When we will send out the products ?
After confirm the payment ,sample need 7-15 days,the need of batch 15-30 days .

Service:
12 years experience in the sector, you will get professional response within 24 hours.
ODM design is warmly welcomed
Be free of 1 year warranty and lifetime maintenance service

Contact us:
If you have any question,welcome to contact us.
Your close sttention to our company is highly appreciated.
Welcome to visit our official website www.szkiosk.com