Maison > Produits > Services de rack > 【SL201-D08R】2U8 Bay 3.5 inch m.....
Parcourir les catégories
Single Page(11)
container house(0)
Services de rack(12)
solar power(2)
photo booth(22)
Digital Signage KIOSK(46)
industrial touch Panel PC(47)
All-In-One PC/Touch Panel PC(140)
Moniteur d’armature ouverte(16)
Moniteur à écran tactile(42)
PC BA Design(3)
medical science monitor display(6)
Châssis PC AIO coffret accessoires(8)
Commentaires des clients
    Contactez-nous
    Bureau: HK SZKIOSK Co. Limitée
    301 # bangtai Building, 4e aobeiwo industriel,
    xiangjiaotang, bantian, Longgang,
    Shenzhen, Guangdong, Chine (continent).
    Tél: 0086-0755-28367760  
    MobilePhone: + 86-13823794688
    mail:sales@szkiosk.com

    Contactez maintenant
    【SL201-D08R】2U8 Bay 3.5 inch model

    【SL201-D08R】2U8 Bay 3.5 inch model

    • 【SL201-D08R】2U8 Bay 3.5 inch model


    Name

    SL201-D08R

    Processor

    1 or 2 Intel® Xeon® Scalable Processor, up to 205W

    MB Model

    G3DCL-B/G3DCL-TB

    Chipset

    Intel®C621/C622 series server dedicated chipset

    Memory

    (System)

    Supports DDR4 LRDIMM/RDIMM/NV-DIMM ECC memory

    Memory frequency supports 2133/2400/2666/2933MHz

    Single CPU supports 6*DDR4 channel, each channel supports 2 memory slots, Total 24*DDR4 memory slots in CPU0/CPU1. Single slot capacity is 8GB, 16GB, 32GB, 64GB, 128G

    Expansion Card

    1.(Left) PCI-Express 3.0 X24 slots are from CPU0

    2.(Middle) PCI-Express 3.0 X24 slots are from CPU0 / CPU1

    3.(Eight)PCI-Express 3.0 X16 slots are from CPU1.

    Hard Disk

    Max. 8 front 3.5/2.5-inch SAS/SATA (HDD/SSD)

    Max. 4 rear 2.5 inch SAS/SATA (HDD/SSD), 4 rear 3.5/2.5-inch SAS/SATA (HDD/SSD), onboard 3*SFF-8643 interfaces , 2* SATA DOM

    CD-ROM

    1

    M.2 SSD

    2 M.2 PCIE X2 (2280)

    LAN

    Onboard 2 Gigabit RJ45 data net port (optional 2* 10Gigabit RJ45)

    External Port

    Front: VGA, 2* USB3.0

    Rear: VGA, 2* USB3.0, 1 management net port, 2 RJ45 data net ports, 1 DB-9 COM

    Management

    Onboard iBMC management module, supports IPMI, SOL, KVM Over IP, Virtual media and more

    System Fan

    4* 8038 fan (optional 4* 8056 fan)

    Power Supply

    Standard configurated withPlatinum 550W, optional 800W, 1200W, 1600W hot-swap Redundant power supply (based on the actual power)

    Dimensiom

    2U rackmount, 748x433.4x87.6mm


    Front panel components

    2U8 Bay model

     

     

    Figure 2- 5

    S/N

    Name

    S/N

    Name

    1

    DVD Driver

    3

    USB3.0 Port

    2

    VGA Port

    4

    3.5 inch Hard Disk

    Front panel port description

    Name

    Type

    Note

    VGA Port

    DB15

    Used to connect display terminal, such as screen or KVM.

    USB Port

    USB 3.0

    USB external interface is provided to access USB devices.

    Note: When using the external USB device, please make sure that the USB device is in good condition, otherwise the server may work abnormally.


    Front panel LED and button

     

     

    Figure 2- 8

    S/N

    LED/Button

    S/N

    LED/Button

    1

    Power switch button/LED

    5

    System alarm LED

    2

    UID button/LED

    6

    Network port 1 connection status indicator

    3

    Reset button

    7

    Network port 2 connection status indicator

    4

    Hard disk LED

     

     

    Table 1- 12

     

    LED Status Description

    Icon

    LED/Button

    Description

     

     

    GOOXI Logo

     

    Power LED

    Power LED description:

    Green (on): powered on.

    Green (blinking): standby.

    Green (off): power off.

    Power button description:

    Shortly press the button in the power-on status, and the OS will shut down normally.

    Hold down the button for 6 seconds to power down the server.

    When the power is on, press the button to start the machine.

     

    UID LED/Button

    UID LED/Button is used to locate the server to be operated. The indicator can be remotely turned off/on by manually pressing UID button or BMC command.

    UID description:

    Blue (on/blinking): the server is located.

    Off: server is not located.

    UID button description: press the button briefly to turn on/off the positioning light

     

    Reset Button

    Restart the server

     

    Hard disk LED

    Green (blinking): the hard disk is running normally

     

    System Alarm

    Including system alarm, fan alarm, power alarm, etc., and the details can be viewed through IPMI management software

     

    LAN LED

    Green (on): the network port connection is normal.

    Off: the network port is not in use or breakdown.

    Note: it corresponds to two 1GE network ports on the motherboard.

     

    LAN LED

    Green (on): the network port connection is normal.

    Off: the network port is not in use or breakdown.

    Note: it corresponds to two 1GE network ports on the motherboard.


    Rear panel components

     

    Figure 2- 9

    S/N

    Name

    S/N

    Name

    1

    Rise Module

    7

    USB 3.0 Port

    2

    HDD Module

    8

    OCP3.0 Port

    3

    Management Net Port

    9

    Power Module 1

    4

    VGA Port

    10

    Power Module1 AC Port

    5

    RJ45 Gigabit LAN

    11

    Power Module 2

    6

    COM

    12

    Power Module 2 AC Port

    Table 1- 14

    ² Note

    Both 1 and 2 can be equipped with rear hard disk module or Riser module. The figure is for reference only, and the actual configuration as standard.

    Rear panel port description

    Name

    Type

    Number

    Description

    VGA Port

    DB15

    1

    It is used to connect display terminal, such as screen or KVM.

    Management Net Port

    GE BASE-T

    1

    Provides 1000 Mbit/s LAN. Through this port, the server can be managed.

    USB Port

    USB 3.0

    2

    USB port is provided to access USB devices.

    Caution

    When using the external USB device, please make sure that the USB device is in good condition, otherwise the server may work abnormally.

    RJ45 Gigabit Port

    GEBASE-T

    2

    Server network port.

    Power Module AC Port

    /

    1 or 2

    You can choose the number of power supply according to your actual needs, but make sure that the rated power of the power supply is greater than the rated power of the whole machine.

    COM

     

    1

    Serial communication port

    OCP3.0 Port

     

    1

    Installation of OCP3.0 network card

    Table 1- 15

    Rear panel LED and button 

     

    Figure 2- 10

    S/N

    Name

    S/N

    Name

    1

    Connection status LED

    4

    Data transmission status LED

    2

    Data transmission status LED

    5

    Power module LED

    3

    Connection status LED

    6

    Power module LED

    Table 1- 16

    LED/Button

    Description

    Power module LED

    Green (on): the input and output are normal.

    Red (on): indicates that the input is normal, and there is no output due to power over temperature protection, power output over-current / short circuit, output over-voltage, short circuit protection, device failure (excluding all device failures), etc.

    Green (1Hz / blinking): the input is normal, and the output is closed due to power on or in position; input overvoltage and undervoltage.

    Green (4Hz / blinking): Firmware is in the process of online upgrading.

    Off: no AC power input.

    Connection status LED

    Green (on): indicates Gigabit link.

    Orange (on): 100 Megabytes Link.

    Off: 10 trillion Link.

    Data transmission status LED

    Yellow (blinking): data is being transmitted.

    Off: no data transmission.

    Table 1- 17

     

    Balise:
    Electronical Co.ltd Shenzhen kiosk

    Tel:13823794688

    Personne à contacter:Dragon wang

    Envoyez votre demande directement à nous
    afficher du code sur le curseur dans la zone de saisie
    ( 0 / 3000 )

    Contacter le fournisseur

    Renseignez-vous maintenant
    ×